Assessing the possibility of solidification and stabilization of pyrite cinder by using quicklime and fly ash

Abstract

The aim of this study was to determine the possibility of using two low-cost binders,quicklime and fly ash for the solidification/stabilization (S/S) of pyrite cinder.Pyrite cinder, used in this study, represents a remnant from sulfuric acid productionin fertilizer factory IHP “Prahovo” A.D. (Serbia), and has a very high toxicmetal content. High contents and leachability of copper, lead and zinc make thiswaste material hazardous, representing an extraordinary risk to the environment.In order to determine the leaching behavior of the S/S mixtures, four single-stepleaching tests were performed, each one having a different sort of leaching fluid(deionized water, inorganic and organic acidic solutions). X-ray diffraction (XRD),scanning electron microscope (SEM) and energy dispersive X-ray analyzer (EDS)were implemented to elucidate the mechanisms responsible for immobilization ofCu, Pb and Zn. Overall, the test results indicated that S/S treatment using bothquicklime and fly ash was effective in immobilizing these metals, especially whenthere is a higher share of binder present. Treated waste can be safe for disposal andeven considered for “controlled utilization”. Furthermore, the use of fly ash for S/Streatment of pyrite cinder solves the disposal problems of two waste types, as it alsorepresents a secondary industrial product.

Citation

Copyright

Article metrics