Faculty of Technology and Metallurgy, Saints Cyril and Methodius University of Skopje, Skopje, North Macedonia
Faculty of Technology and Metallurgy, Saints Cyril and Methodius University of Skopje, Skopje, North Macedonia
Faculty of Technology and Metallurgy, Saints Cyril and Methodius University of Skopje, Skopje, North Macedonia
Faculty of Technology and Metallurgy, Saints Cyril and Methodius University of Skopje, Skopje, North Macedonia
In this study the 3D surface model was successfully applied in investigating the influence of theprocess parameters on the physical and mechanical properties of the glass-ceramics. Glassceramicswas produced from coal fly ash and waste glass through the sintering method. The rawmaterial was taken from “REK Bitola”, a thermal power plant in the Republic of Macedonia.Glass-ceramics was obtained through the process of consolidation. Compacts with different ratio offly ash and waste glass were pressed at 45 MPa, sintered in the temperature interval from 1000 to1100oC, and isothermal time at the final temperature from 1h to 5h. The process of optimizationwas conducted on the process parameters such as quantity of glass, sintering temperature andisothermal time. According to the results of the process of optimization presented by the softwarepackage, a final model equations of the density and bending strength dependence were obtained.
Authors retain copyright. This work is made freely available online under an open-access model under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License (CC-http://creativecommons.org/licenses/by-nc-nd/4.0/BY-NC-ND 4.0).
The statements, opinions and data contained in the journal are solely those of the individual authors and contributors and not of the publisher and the editor(s). We stay neutral with regard to jurisdictional claims in published maps and institutional affiliations.